F-4 Phantom II
by Daren Savage

The mounting tabs seen here are cut from 1/8" birch plywood and are intended to simplify the mounting of the Kyosho fan unit.	The mounting tabs have been glued to the fan unit using 2 hour epoxy. When gluing the tabs to the fan unit, let the fan unit sit in the vertical position seen here.
Note the fore-aft stiffner used for alignment of the tabs. Glue both tabs to the fan unit at the same time.	Both mounting tabs have now been glued to the fan unit and the fan unit can now be mounted in a more conventional manner.